Electrical Power Transmission Multiple choice questions Part 1
Contents
- 1 Worldwide Power transmission is done at
- 2 Single-Stage Optimization Model is limited in providing
- 3 The factors which should be considered while designing overhead lines
- 4 OH Power transmission comprises
- 5 Series capacitors are employed to
- 6 HVDC Transmission requires
- 7 HVDC voltage has
- 8 Transmission lines having span 250 km or higher are considered
- 9 Usually, electric power systems are represented via
- 10 The nodal point of transmission networks
Worldwide Power transmission is done at
1. Worldwide Power transmission is done at:
- 100 – 500 kV
- 254 – 380 kV
- 138 – 765 kV
- 1000 kV – 5000 kV
Correct answer: 3. 138 – 765 kV
Single-Stage Optimization Model is limited in providing
2. Single-Stage Optimization Model is limited in providing:
- Information on expansion timing
- Year by year expansion calculations
- Both of these
- None of these
Correct answer: 1. Information on expansion timing
The factors which should be considered while designing overhead lines
3. The factors which should be considered while designing overhead lines:
- Voltage level
- Protection techniques
- Sag
- Stress
- All of these
Correct answer: 5. All of these
OH Power transmission comprises
4. OH Power transmission comprises:
- 3-phase, 3-wire
- 3-phase, 4-wire
- 3-phase, 2-wire
- 2-phase, 2-wire
Correct answer: 1. 3-phase, 3-wire
Series capacitors are employed to
5. Series capacitors are employed to:
- Transform voltages
- Reduce line impedance
- Decrease voltages
- Disconnect lines
Correct answer: 2. Reduce line impedance
HVDC Transmission requires
6. HVDC Transmission requires:
- 2 conductors
- 3 conductors
- 4 conductors
- 5 conductors
Correct answer: 1. 2 conductors
HVDC voltage has
7. HVDC voltage has:
- No corona losses
- Same corona losses as in AC
- Lesser corona losses than AC
- More corona losses than AC
Correct answer: 3. Lesser corona losses than AC
Transmission lines having span 250 km or higher are considered
8. Transmission lines having span 250 km or higher are considered:
- Short transmission lines
- Medium transmission lines
- Long transmission lines
- None of these
Correct answer: 3. Long transmission lines
Usually, electric power systems are represented via
9. Usually, electric power systems are represented via:
- Three phase diagrams
- Single line diagram
- Two-phase diagram
- None
Correct answer: 2. Single line diagram
The nodal point of transmission networks
10. The nodal point of transmission networks:
- CTs
- PTS
- Buses
- Breakers
Correct answer: 3. Buses
Next part Electrical Power Transmission MCQs Part 2
Other Electrical Power Transmission MCQs [Complete list]