Power System MCQ Part 2.
Contents
- 1 Skin effect increases
- 2 Definition of short transmission lines
- 3 Voltage regulation of transmission line is greatest for which of following power factors
- 4 Which type of insulator is recommended for places where direction of transmission line changes
- 5 A CT having a secondary current of 5 A, and an RF of 4.0 can produce a secondary current up to
- 6 String efficiency of high voltage transmission lines is around
- 7 A generator has an impedance value of 3 Ω. What is its base impedance value in per-unit, considering bases of 1000 MVA and 22 kV
- 8 Which of following will result in an increase of cost of an overhead transmission line
- 9 Magnetizing of the current transformer can affect its accuracy
- 10 Potential across the various discs of suspension string is different. This is primarily due to
Skin effect increases
Skin effect increases:
- Resistance of power line
- Inductance of power line
- Capacitance of power line
- All of these
Correct answer: 1. Resistance of power line
Definition of short transmission lines
The lines below _____ are considered as short transmission lines:
- 20 km
- 80 km
- 240 km
- 600 km
Correct answer: 2. 80 km
Voltage regulation of transmission line is greatest for which of following power factors
Voltage regulation of transmission line is greatest for which of following power factors:
- Leading PF
- Lagging PF
- Both of these
- None of these
Correct answer: 2. Lagging PF
Which type of insulator is recommended for places where direction of transmission line changes
Which type of insulator is recommended for places where the direction of transmission line changes:
- Pin type
- Suspension type
- Strain type
- Shackle type
Correct answer: 3. Strain type
A CT having a secondary current of 5 A, and an RF of 4.0 can produce a secondary current up to
A CT having a secondary current of 5 A, and an RF of 4.0 can produce a secondary current up to:
- 0.8 A
- 1.25 A
- 4 A
- 20 A
Correct answer: 4. 20 A
The rating factor is in a short form known as RF of a current transformer and it implies the maximum continuous current that can flow through the CT primary without exceeding the thermal capability of the CT windings.
String efficiency of high voltage transmission lines is around
String efficiency of high voltage transmission lines is around:
- 20%
- 40%
- 80%
- 99%
Correct answer: 3. 80%
A generator has an impedance value of 3 Ω. What is its base impedance value in per-unit, considering bases of 1000 MVA and 22 kV
A generator has an impedance value of 3 Ω. What is its base impedance value in per-unit, considering bases of 1000 MVA and 22 kV:
- 0.225 Ω
- 0.484 Ω
- 0.876 Ω
- 1.22 Ω
- None of above
Correct answer: 2. 0.484 Ω
Solution:
Base Impedance = (Base kV(L-L))^2 / Base MVA 3ɸ = 22^2 / 1000 = 0.484 Ω
Which of following will result in an increase of cost of an overhead transmission line
Which of the following will result in an increase in cost of an overhead transmission line:
- Increasing conductor spacing
- Decreasing conductor spacing
- Decreasing ground clearance
- None of these
Correct answer: 1. Increasing conductor spacing
Magnetizing of the current transformer can affect its accuracy
Magnetizing of the current transformer can affect its accuracy:
- True
- False
Correct answer: 1. True
Usually, the magnetization of the CT affects accuracy, so demagnetization is recommended before testing a CT.
Potential across the various discs of suspension string is different. This is primarily due to
Potential across the various discs of suspension string is different. This is primarily due to:
- Self-capacitance
- Shunt capacitance
- Both of these
- None of these
Correct answer: 2. Shunt capacitance